epoxy
-
5.10 €Bring your creations to life and colour with Colorfun epoxy paste! Bright and intense colours. Thanks to its range of intense and bright colours, you can achieve exceptional results with just a few drops. Available in shades such as black, blue, brown, orange, red, oxide yellow, green, white and many others, Colorfun allows you to achieve full and bright colour for every creative project. With its intense and vibrant colours, Colorfun allows you to achieve a full and bright colour for every creative project. High concentration for maximum versatility. The transparency of the colour can be adjusted according to your preference, using concentrations ranging from 0.01% to 5%, depending on the desired effect. With just a few drops you can achieve a transparent and delicate finish, while increasing the concentration makes the colour more intense and opaque. Easy to use: Application is simple and intuitive. The application is intuitive.The application is easy and intuitive.Add the colourant to component A of the resin and mix until you achieve the desired shade. If you want to experiment, you can combine different colours to create unique shades, for example mixing red and white to create a magical pink. Shake the product well before use to ensure even pigment distribution. Specially formulated for epoxy and acrylic resins. Incompatible with polyurethane resins. Make your creation shine! Don't wait any longer: start bringing your ideas to life today with Colorfun's vibrant and versatile colours. Buy now and discover all the creative possibilities our colouring caviar has to offer. Technical data sheet - COLORFUN colour paste. COLORFUN Colour Paste is designed to give intense, bright colours and is ideal for use with clear epoxy resins. Thanks to its high coverage, you can achieve a full and bright colour in just a few drops. At low concentration (0.01%) it maintains an elegant transparency; at the highest concentration (5%) it guarantees an intense and bright colour. Available colours (25 ml each): Black, blue, brown, lemon yellow, olive green, orange, oxidized red, oxidized yellow, green, red, white, magenta, purple. Directions for use: Add colour to resin component A until you get the desired shade. Mix the different colours together to create the desired colour effect (e.g. red + white = pink). To adjust intensity and coverage, use percentages between 0.01% and 5%. Do not exceed 5% to avoid hardening problems. Shake well before use! Warning: The product is not compatible with Resin Pro polyurethane resins.Choose from This product has multiple variants. The options may be chosen on the product page -
- 15 % Discount
Price range: 39.90 € through 590.00 €EPOXYFOOD transparent epoxy resin - certified for food contact applications. * Not suitable for items intended to come into contact with infant formulae. Unleash your culinary and artistic creativity with EPOXYFOOD - the first clear resin certified for food contact and ideal for plates, cutting boards, glasses, cutlery and more. Thanks to its non-toxic and solvent-free formulation, EPOXYFOOD is ideal for cooking as well as artistic creation and decoration, maintaining exceptional transparency and gloss. Key features: Certified safety : EPOXYFOOD catalysed clear colour has a food contact certification, ensuring peace of mind even in contact with liquids and food. Non-toxic and odourless. Excellent transparency : Completely transparent resin after catalysis, it brings out the details of your creation, offering a glossy and self-leveling finish. Durability : Scratch, chemical and abrasion resistant, your work will remain flawless over time. Easy to use : A 100:55 resin to hardener mixing ratio makes it easy to prepare and apply. It is workable after about 10 hours, full cure after 24-48 hours. Versatile : Ideal for use on tablecloths, trays (1-5 mm thick) and artwork up to 1 cm thick. Can be painted with colour pastes or powders if desired. The package includes : nitrile gloves and instructions for optimal use. Choose EPOXYFOOD to take your culinary and artistic creations to the next level, guaranteeing a safe, certified product with impeccable aesthetics. *Documentation guarantees that the raw materials used are those listed by the Department of Health and laboratory migration testing of catalysed resin samples further guarantees that the clear coat will not release harmful substances when applied as directed. The end-user will be able to access this information when the HCCP certificate is issued, which remains the responsibility of the end-user.Choose from This product has multiple variants. The options may be chosen on the product page -
- 15 % Discount
Price range: 35.90 € through 510.00 €EpoxyTable 5 clear resin: ideal for board, wood and resin crafts. Best-selling resin, scratch and yellowing resistant, ideal for castings up to 5 cm thick. Main applications: Production of wood and resin boards with thick castings. Artistic and design projects related to thick casting Enclosures for objects (flowers, coins, stones, etc.). Thick fillings inside moulds and moulding rocket. Main features: Very low exothermicity for castings up to 5 cm (multiple castings can be made 12-24 hours apart). UV filters to prevent yellowing and maintain transparency over time. High mechanical resistance for durable and scratch-resistant surfaces. Low viscosity to remove air bubbles and achieve perfect transparency. Long working time , ideal for complex or detailed projects. Colourable: the resin is completely transparent but can be coloured with any colourant (both paste and powder) between 0.1% and 2.0% if desired. The use of acrylic or water-based dyes is not recommended. Main technical data (click on the "Technical data sheet" icon to display the full technical data sheet). Mixing ratio: 100:55 by weight. Curing time: 24 hours, complete catalysis 48 hours. Maximum thickness per pour: up to 5 cm (multiple pours can be made at 12-24 hour intervals). Working temperature: from +10°C to +30°C. Can be up to 12-12 times per pour. *For further information, please read the specific instructions for use and safety requirements before applying the product. Temperature Maximum weight per application Casting width Maximum recommended thickness 15-20 °C 10 kg ≤10 cm 5 cm >10 cm and ≤20 cm 4 cm (reduced by 20%) >20 cm 3,5 cm (reduced by 30%) 20-25 °C 16 kg ≤10 cm 4 cm >10 cm and ≤20 cm 3,2 cm (reduced by 20%) >20 cm 2,8 cm (reduced by 30%) 25-30 °C 20 kg ≤10 cm 3 cm >10 cm and ≤20 cm 2,4 cm (reduced by 20%) >20 cm 2,1 cm (reduced by 30%) PRECAUTIONS FOR RESINS ESPECIALLY DURING HOT PERIODSChoose from This product has multiple variants. The options may be chosen on the product page -
Price range: 23.40 € through 40.70 €"Liquidissima" epoxy resin "Liquidissima" epoxy resin is a is the ideal product for fine art, jewellery and costume design. Thanks to its high transparency and low viscosity formula, it guarantees a flawless result with a crystal clear water effect that gives your work a long-lasting shine. Crystal clear transparency and glossy surface. You get a self-leveling , glossy surface, ideal for high quality creations. The formula has been developed to minimise air bubbles , ideal for moulds up to 2 cm thick. This resin is ideal for jewellery and decorations that require a transparent and glossy finish. Long working life for maximum precision. Thanks to its extended setting time, "Liquidissima" allows you to work calmly and precisely, making it ideal for art projects and complex castings. The 45-minute use time (at 25°C) allows you to better manage the creative process. Low viscosity and perfect casts With its extremely low viscosity (175-225 cps at 25 °C), "Liquidissima" resin is ideal for applications requiring absolute quality control. This makes it ideal for casting thin films (1 mm) and for work requiring little air bubbles, such as modelling or creating detailed hand-crafted figures. Versatile colouring "Liquidissima" resin is compatible with all the main epoxy dyes, both in paste and powder form, with colour percentages varying from 0.1% to 2.0%. This feature gives you the freedom to customise your creations with an infinite range of colours. Safe and certified. 100% made in Italy, BPA free , solvent free and fragrance free. "Liquidissima" resins are certified non-toxic , making them safe for long term skin contact. They can be used with confidence even for products intended for direct contact with the body. Ideal for: Jewellery and jewellery Jewellery: jewellery and jewellery accessories Jewellery and jewellery designs Casting in complex mouldsChoose from This product has multiple variants. The options may be chosen on the product page -
Price range: 17.20 € through 38.70 €"I-Creation" highly reactive clear epoxy resin is the ideal choice for high quality professional and artistic creations, jewellery, small castings, rapid prototyping, DIY and models. Catalyses half the time! Thanks to ultra-fast polymerisation, you can deposit jewellery and small moulds in as little as 6 hours , achieving a glossy, crystalline surface that lasts. Shine and transparency The impeccable clarity and luster of the "I-Creation" resin are ideal for creating jewellery and precision objects. The UV-resistant formulation prevents yellowing, keeping your creations radiant at all times. Safe and certified 100% made in Italy, BPA-free , solvent-free and fragrance-free. "I-Creation" has a non-toxicity certificate , making it safe even after prolonged skin contact. Easy to use The mixing ratio is simple: 100:50 (component A) with a use time of 10 minutes at 30°C and an optimal working time of 10-15 minutes. The low viscosity reduces air bubbles, ensuring perfect results every time. Fast catalysis Thin layer (1 mm) : catalysis within 6 hours at 30 °C Loose (30 g) : catalysis within 2 hours at 25 °C Creative versatility "I-Creation" can be painted with epoxy inks in paste or powder form (0.1 to 2.0%), offering you endless possibilities for customisation. Ideal for: Quality jewellery Small castings in moulds and decorations Quick prototyping of miniature objectsChoose from This product has multiple variants. The options may be chosen on the product page -
Price range: 44.50 € through 1061.50 €EPOXYTABLE 10 - Resin for casting thick materials Hand-crafted perfection with castings up to 10 cm thick EPOXYTABLE 10 is the flagship of the ResinPro range of two-component epoxy resins, designed to provide perfect casts in thick layers without overheating or distortion. It is ideal for wood and resin board, artwork and other applications that require superior quality and long-term durability. Key features: High-thickness castings: allows castings up to 10 cm thick without risk of overheating, warping or bubbling. Transparency and brilliance: Provides crystal clear clarity and unprecedented brilliance, with UV filters that prevent yellowing and maintain clarity over time. High mechanical resistance. Low exotherm: Low exotherm prevents overheating during the curing process, ensuring uncompromised results. Ease of use: low viscosity and long working time, it is easy to apply for professionals and amateurs alike. Technical data: Application ratio: 4:1 (epoxy resin: hardener). Viscosity: Epoxy resin: 1900 mPas Viscosity: 1,98 % Epoxy Mixture: 400 mPas Application time: 24 hours (per 125 g at 25 °C). Gelling time: 48 hours (for 1 mm thick layer at 25 °C). Mould removal time: 2-3 days Full cure: 7 days at 25°C Application: Preparation. Mix thoroughly to a homogeneous mass. Application:Pour the mixture onto the prepared surface, avoiding air bubbles. Prepare the mixture before application, avoiding any splashes. Use suitable tools for even distribution. Curing: Allow to cure at room temperature (25 °C). Use suitable mixing tools. Avoid contact with moisture and heat sources during the drying process. Support and advice: As a direct manufacturer, we offer professional support for all questions and needs. As a direct supplier, we are always available to offer professional assistance and advice. Feel free to contact our support team for expert help and advice. Contact support and advice: EPOXYTABLE 10 is specifically designed for thick casts and is not suitable for applications requiring acrylic or liquid dyes. For best results, be sure to follow the instructions. If you are looking for a resin that will deliver impeccable quality and excellent performance for your work, EPOXYTABLE 10 is the perfect choice! Main features: 4:1 ratio (by weight). Component Epoxy resin Hardener SEGA Country Liquid Liquid Liquid Garder colour 1 1 1 Viscosity mPas Year 1900 40 400 Useful life (125 g at 25°C) 24 hours Gel setting time (1 mm thickness 25°) 48 hours form withdrawal days 2-3 full cure (25 °C): 7 daysChoose from This product has multiple variants. The options may be chosen on the product page -
- 15 % Discount
Price range: 28.55 € through 89.00 €HEAT PRO - scratch-resistant protective coating Resistant up to 200°C Are you looking for a product that will effectively protect your resin creations? Are you worried about scratches and wear on your trays and drinking vessels? HEAT PRO is the perfect solution! This two-component clear polyurethane resin is designed to protect small and medium sized surfaces, such as drinking bowls and trays up to 25 cm in diameter. For larger surfaces such as tables or counters, we recommend our Art Pro Deluxe. Key features: Scratch and abrasion resistance: its elastic formulation absorbs knocks and scratches, maintaining a mirror-like glossy finish. High temperature resistance. High resistance to yellowing: Maintains transparency over time thanks to anti-yellowing filters. Catalysis: It solidifies at room temperature (20 °C) in a few hours and is fully ready for use after 24 hours. Application and use: Thickness: Apply a top coat of 1-3 mm to cover medium to small surfaces. Maximum recommended surface area: 0,5 m² (unevenness may occur on larger areas). Consumption: 1,2 kg/m² per 1 mm thick layer. Curing time: gel time about 3 hours at 20 °C; complete curing after 48 hours. Instructions for use: Preparation: mix components A and B in a ratio of 100:75. Mix in a clean container for 2 minutes, then pour over and mix for a further 2 minutes. Application: Apply only to completely dry and primed surfaces. 100 - 100 %. For painted surfaces or other materials, apply a coat of clear resin, wait 24-48 hours and then apply HEAT PRO. Removal of bubbles: Use a heat source (burner or hair dryer) for a short time (maximum 2 seconds) to remove bubbles without damaging the finish. Warnings: Personal protection: Wear safety glasses, gloves and suitable protective clothing during use. Storage: Store in a cool, dry place at a temperature of 15-30 °C, away from direct sunlight and heat sources. Packaging: 1,8 kg (1029 g + 771 g). 450 g (257 g + 193 g) Technical characteristics: Appearance: Low viscosity homogeneous liquid. Viscosity at 25°C: A: 0,6-1,0 Pa, B: 0,2-1,2 Pa. Viscosity at 25°C: A: 0,6-1,0 Pa, B: 0,2-1,2 Pa. Density: A: 1,2 to 1,3 g/cm³, B: 0,95 to 1,20 g/cm³ at 25 °C. Shore hardness: 80-85 cubic metres. Elongation at break: 350-480%. Water resistant: 0,2 MPa pressure for 12 hours. Note: VOC-free. The hardened mass can only be removed mechanically and its water absorption within 24 hours is not greater than 1-3%. Use up limited quantities and guarantee the best protection for your creations!Choose from This product has multiple variants. The options may be chosen on the product page -
Price range: 33.60 € through 134.60 €Revive and protect wood with EPOXYWOOD! Discover EPOXYWOOD, the ultimate epoxy resin to protect, restore and strengthen wood. EPOXYWOOD is designed to provide superior protection and a flawless finish and is the ideal choice for any woodworking project. Key features: Strengthen your wood: EPOXYWOOD is designed to preserve and strengthen wood, providing advanced protection from the elements and water. It provides lasting beauty and resistance to everyday wear and tear. EPOXY provides durability, durability, and durability to protect and restore: Transform furniture, floors and wood details with a smooth, long-lasting finish. Give your treasured items a new lease of life with a renewed and flawless look. Unprecedented stability. Strength and aesthetics. It is also easily stainable, allowing you to express your creativity. Recommended applications: Protective coating. Ideal for restoring and strengthening furniture, floors and other wooden structures. Vaiguvalu: Used to stabilize wood prior to resin casting, improving the quality of your creation. Various surfaces. Technical data: Colour: Transparent Transparent Mixing ratio: 100 parts of component A and 50 parts of component B Viscosity at 20°C: 900 ± 200 mPas. Density: 1,10 ± 0,03 g/cm³ at 20°C at 20 °C Product lifetime at 25°C: 50 ± 10 min. Full cure: 7 days Curing time at 20°C and 50% relative humidity: 5-6 hours Maximum overlap time: 12 hours Interpenetrating substances: 100% Shore hardness D: 80 Instructions for use: Surface preparation. Make sure that the surface is dry, dry, dry and free from any oil or solvent residues. Prepare the mixture: mix components A and B in a 2:1 ratio by weight, mixing thoroughly for at least 2 minutes. Apply two coats of resin every 12 to 24 hours. The resin cures in 5-6 hours, but fully cures after 7 days at 20 °C. The resin should be applied between 12 and 24 hours. Cleaning: Use an epoxy solvent to clean tools. Protect the resin from humidity and freezing temperatures. Storage: Store the resin at a temperature of 10-30 °C (10-30 °F). In case of crystallization, heat it with hot water in a bain-marie and allow to cool before use.Choose from This product has multiple variants. The options may be chosen on the product page
-
20.40 €CARBON AND GLASS FIBER EPOXY – Epoxy reed for carbon and glass fiber lamination The product is manufactured to guarantee maximum mechanical strength and good ease of use when impregnating materials. When applied to epoxy technical fabrics at room temperature, it guarantees maximum mechanical durability and thanks to good resistance to space wet, the final finish is glossy.
-
22.50 €Your creativity, simplified and brilliant with Evershine Evershine One-to-One transparent resin is the ideal solution to simplify and bring to life your artwork and jewellery thanks to its new formula that retains its shine even in high humidity. Easy to use, with a mixing ratio of 1:1 (by volume), it is non-toxic and guarantees flawless results every time. Technical characteristics and advantages High resistance to environmental humidity : ideal for humid environments or cold seasons, prevents opaqueness and wrinkles. Transparency and durability : It offers excellent scratch resistance and maintains its gloss even in difficult situations. Easy to mix : 1:1 by volume and 100:92 by weight, with extended working time (1 hour and 30 minutes at 30 °C). Versatile : can be used to protect silicone mouldings, printed images or decorative creations by injection. It is ideal for thin films (1 mm) and castings up to 3 cm. Compatibility : It is perfectly compatible with the main epoxy ink pastes, allowing you to customize your works. Ideal applications Jewellery and small castings in silicone moulds Modelling on resin surfaces and making artworks Always glossy protective coatings Wait no more! Start creating today and get brilliant, consistent results every time with Evershine One-to-One resin. Buy now and transform your creativity into brilliant, long-lasting works of art!
-
Price range: 19.30 € through 48.20 €IWHITE white polyurethane moulding iron - your solution for craft and rapid prototyping Create, innovate and realise with IWHITE polyurethane casting resin! Discover IWHITE , a high-performance polyurethane resin ideal for your craft creation and rapid prototyping. With IWHITE, you can create wonders and copy objects of all sizes quickly and accurately. Key features: Highly flowable and easy to colour: IWHITE is ideal for hand-crafting and modelling thanks to its high flowability and easy colouring in both liquid and cured states. Fast curing time. High hardness and mechanical performance: ideal for applications requiring high hardness and strength. Technical characteristics: Colour: light beige - white Viscosity: 70 mPa.s Viscosity: 70 mPa.s Shelf life: 10 minutes Maturing time: 30 minutes Weight ratio (A ): 100:110 Hardness: 100 Shore A Important notes: Temperature of use: Do not use at temperatures below 8-10 °C. Safety: Wear gloves and protective goggles during mixing and application. Wash rollers and tools with an epoxy or nitro solvent. Dispose of packaging according to local regulations. For more information, read the safety data sheet. Application tips: Preparation: Shake the packets and let them stand upside down for 5 minutes to even out the contents. Allow to stand upside down for 5 minutes before use. 5 minutes for the packets to set. Mixing: Follow the ratio A+B (100:110 by weight). Use weights and follow the formula: grams of A x 1.1 = grams of B. 100 to 100 grams. Example: 100 grams A x 1,1 = 110 grams B Example: 50 g A x 1.1 = 55 g B Application: Mix A and B for 1 minute. Pour the mixture into a silicone mould. Mix the mixture into the clay and mix for 30 minutes, then take out your model, perfect in every detail!Choose from This product has multiple variants. The options may be chosen on the product page
-
20.40 €"ONE-TO-ONE FLEX" epoxy resin is the ideal solution for those who want to create malleable, flexible and long-lasting works of art. With its exceptional flexibility and crystal clear transparency, this resin is ideal for a wide range of creative applications such as jewellery, sculpture, protective coatings and modelling. Unlimited flexibility "ONE-TO-ONE FLEX" allows you to mould and bend your creations for 12-24 hours after mixing, maintaining the desired shape even after setting. This elastic resin is ideal for creating vases, sculptures and other works of art that require unique malleability. Crystal clear transparency and glossy finish The resin offers a glossy surface and impeccable clarity , making it ideal for creating protective coatings that enhance the beauty of your work. UV resistance ensures that your creations remain bright and yellow-free over time. Long workability for detailed creations With extended workability, you'll have plenty of time to create even the most intricate designs with precision. The 1:1 mixing ratio makes it quick and easy to use, and the working time allows you to carefully shape your creations. Unlimited customisation "ONE-TO-ONE FLEX" resin can be coloured with any epoxy dye, in paste or powder form (0.1% to 2.0%), giving you endless creative possibilities. Ideal for adding colour and personality to your work. Ideal applications Jewellery and small moulds Sculptures and vases that can be modelled in folded resin Abstract artworks on surfaces such as geodesics Protective coatings that are always glossy and durable Safe and certified 100% made in Italy, ONE-TO-ONE FLEX is BPA-free , solvent-free and odourless. It is safe for long term skin contact and has a non-toxicity certificate to ensure peace of mind during use. Professional support Our dedicated support team is always available to answer any questions and provide personalised advice, ensuring an optimal user experience. Buy now and unleash your creativity with "ONE-TO-ONE FLEX" : an epoxy resin that turns your ideas into reality, offering unprecedented flexibility and enchanting transparency !
-
Price range: 157.00 € through 559.00 €Description Experience the ultimate in quality and performance with our Crystal Clear Epoxy Premium. This epoxy resin is designed for those looking for uncompromising excellence and durability and is the ideal choice for wood tables, artwork and large-scale projects. Key features: Achieving trouble-free thickness: Thanks to the extremely low exothermic nature of EPOXY PREMIUM, layers up to 7.5 cm thick can be cast without overheating. This is because it can be used with a very low pressure of up to 7.5 MPP.PREMIUM®, which allows for a very high density of up to 7.5 times the polymer thickness. High transparency. EPOXY PREMIUM guarantees high mechanical resistance, protecting your work from scratches and wear, even in high traffic areas. UV protection. High-performance UV protection: Advanced formulation minimizes bubbles and allows for touch-ups during application thanks to low viscosity and extended working time. Technical specifications: Mixing ratio: 100:42 by weight | 2:1 by volume. Sizes: 100 to 100 % by weight (1.1 to 2.1) Colour: Transparent with a light blue tint. Viscosity (25°C): 830 ± 100 mPas Gel-life (1 mm thickness at 25 °C): 48 hours Curing: 2 days Full cure (25°C): 7-10 days Why choose EPOXY PREMIUM? Ideal for tables and artwork: create wood and resin tables with flawless and long-lasting results. Ideal for professionals: thanks to its excellent properties, it is ideal for craftsmen and professionals looking for high quality results. Ideal for craftsmen and craftswomen who find the best quality results: We are direct manufacturers and offer professional support for any questions or advice. We are available to help and support with any queries or queries, and we are happy to provide support and advice. Turn your ideas into timeless masterpieces with ease and precision!Choose from This product has multiple variants. The options may be chosen on the product page
-
12.90 €Our anti-bubble mixer is easy to use and reusable, ensuring perfect mixing, avoiding bubbles and saving time. The anti-bubble mixer for epoxy mixing is a high quality tool to achieve a perfect and uniform mixing of epoxy resins without bubbles. Thanks to its innovative technology, this mixer guarantees professional results, reducing the time and effort needed for mixing. In addition, the mixer is easy to use, clean and reusable, making it an environmentally friendly and economical choice for those working with epoxy resins. Advantages: ✔️ Avoids bubbles when mixing: thanks to its gentle mixing action, the mixer avoids bubbles, ensuring an even and perfect mixing of the epoxy resins. ✔️ Guarantees perfect mixing of the resins: thanks to its innovative technology, the mixing blender allows a perfect and uniform mixing of the epoxy resins, ensuring a professional result. ✔️ Easy to use, easy to clean and reusable: the mixing blender has been designed to be easy to use even for those with no experience in resin mixing. In addition, it is easy to clean and reusable, making it an environmentally friendly and economical choice. ✔️ Saves time: Thanks to its innovative technology, the mixing blender allows you to quickly and easily achieve perfect and uniform mixing of epoxy resins, saving time and effort. If you want to achieve professional results when mixing epoxy resins and save time and effort, buy our anti-bubble mixer now.
