Silicones

Silicone rubbers (both liquid and plastic) are used to create molds, and then to redo the most diverse items. They are compatible with virtually any material: epoxy resins, concrete, wax, metal, ceramics, glass, wood and plastic in general.

If desired, in principle, any item can be copied, wanting to make a silicone mold. It is important to use the right working methods and products suitable for work.

At the bottom of the page you will also find additional information about which silicone is the most suitable for you.

8 Human Growth Hormone

Filters
  • Quick view

    i-Gum silicone rubber

    18.40 € – 34.70 €
    Completely non-toxic silicone paste pod, which is applied directly to the reproducible model. Since i-Gum is completely non-stick on all surfaces, it is not necessary to wash the instruments after use, and it is not necessary to lubricate the model with other means of release.
    Select options
  • Quick view

    Liquid Mold

    21.30 € – 107.00 €
    Liquid binary silicone for making rubber molds. Silicone rubber capable of penetrating anywhere and re-enacting all the small details. It is suitable for the manufacture of small pieces of objects even in very small details. Before use, it is necessary to add 5% hardener. The finished form is a medium-strength silicone rubber. It has good mechanical properties, especially for making detailed molds. For example, the product gets a bronze statue copy and then resin (polyester, polyurethane and epoxy), natural and synthetic wax, re-establish an existing bronze statue with cement or plaster.
    Select options
  • Quick view

    GlobalWax

    19.90 €
    GlobalWax is a sprayable wax that creates an anti-stick layer. High temperature tolerance (up to + 180 ° C). We recommend using, above all, to prepare molds and formwork for pouring resins. You can spray it on wood, metal, plastic or even cardboard, and after a few minutes you will have a completely anti-stick surface to pour resin or other compounds. Use - spraying. Color - White Packaging: 400 ml
    Add to cart
  • Quick view

    Pure Mold

    33.60 € – 93.50 €
    A +B (250g + 250g) Drying time: 4H PURE MOLD is a two-component, liquid and transparent silicone rubber that dries at room temperature. Due to its good fluidity, it is suitable for forms of models that require accuracy. Suitable for most epoxy, polyurethane, acrylic, plaster and cement forms.
    Select options
  • Quick view

    i-Gum fast silicone rubber

    18.40 € – 34.70 €
    Completely non-toxic silicone paste pod, which is applied directly to the reproducible model. Since i-Gum is completely non-stick on all surfaces, it is not necessary to wash the instruments after use, and it is not necessary to lubricate the model with other means of release.
    Select options
  • Quick view

    GlobalWax (liquid)

    21.50 €
    GlobalWax is a wax applied with a brush or paint gun that creates an anti-stick layer. High temperature tolerance (up to + 180 ° C). We recommend using, above all, to prepare molds and formwork for pouring resins. You can spray it on wood, metal, plastic or even cardboard, and after a few minutes you will have a completely anti-stick surface to pour resin or other compounds. Use – brush or paint gun. Color - White Packaging: 1000 ml
    Add to cart
  • - 19 % Discount
    Quick view

    LatexPro

    8.00 € – 12.00 €
    LatexPro LatexPro, based on a pre-vulcanised natural rubber latex, is the ideal solution for protecting surfaces and preventing unsightly resin stains, for example around the edges of paintings. In addition to this valuable property, it is widely used in stenography, special effects and fabric treatment. Your perfect ally for theatrical effects and impressive special effects. What is LatexPro? It is a type of product specifically designed to prevent droplets from sticking to the opposite side of the surface during casting (like liquid tape). This product has a liquid consistency and is used to create a barrier that prevents the liquid from sliding or dripping onto unwanted parts. It is a practical solution for achieving cleaner and more accurate results in your artistic creations. How to use: Multi-faceted and transparent, LatexPro provides excellent elasticity. It is ideal for creating moulds, masks, special effects and stenography. In addition, it is ideal for working on fabrics, metals and other surfaces. Technical specifications: For optimum preservation, store in a place protected from heat and light at 15-20°C. For best results, keep the product in a cool and dry place, away from heat and moisture. LatexPro: the protection you didn't see, but knew you wanted.
    Select options
  • Quick view

    Silicone oil for mould protection and art (18ml)

    5.90 €
    ResinPro silicone oil - protect and enhance your creations! (18ml) ResinPro Silicone Oil is a very high quality product designed for exceptional durability of your silicone moulds. Not only that: by adding a few drops to the resin, you get unique effects and surprising shades, perfect for adding depth and originality to your projects. Product features: Ingredients. Main use: protection and maintenance of silicone moulds. Artistic applications: special effects in resin and liquid painting. Advantages of silicone moulds: Exceptional durability: maintains the softness and non-caking properties of silicone moulds over time. Long-lasting durability and long-lasting durability of silicone moulds.Easy to use: simply apply the oil to the surface of the mould with a cotton swab to renew and protect it. Wear prevention: protects moulds from premature wear, prolonging their life. Artistic applications: Special effects on resin: add a few drops of silicone oil to your coloured resin paste to achieve surprising effects when moulding. The cells in the resin can break down and create magical visual effects, expanding your creative possibilities. Casting and liquid dyeing techniques: use silicone oil with acrylic dyes in casting or liquid dyeing techniques to achieve a beautiful wet effect on canvas. This will add an extra dimension to your artwork, making your creations even more unique and exciting. How to use: For silicone moulds: apply silicone oil to the surface of the mould with a cotton bud. For your moulds, use a silicone mould remover to remove the moulds' silicone surface. For resin effects: add a few drops of oil to the coloured resin before pouring. See how mobile and other special effects develop. For water-based paints: mix the oil with acrylic paints to achieve a wet effect on the canvas that will enhance the visual quality of your work. Unleash the magic of your creations! With ResinPro silicone oil, you not only protect and extend the life of your silicone moulds, but also open up new ways to express your creativity with stunning visual effects. Get inspired and take your artwork to the next level!
    Add to cart

Different DIY silicones and their properties

Liquid silicone rubbers

Liquid silicone rubber for molds is a casting silicone that is poured directly onto the model to be copied (before, place the product to be copied in a container, and then pour the silicone on top to prevent the silicone from spilling over the edge).

Silicone in liquid form passes through all corners and creates a faithful copy of the original. It is especially suitable for 3D forms (such as a ring or figurine), but requires more preparation and drying time.

Plastic silicone rubbers

Plastic two-component silicone rubber is a soft and easy-to-mold product. The advantages include:

  • particularly easy to use,
  • non-toxic,
  • easy to apply to the original

Plastic silicone rubber tends to copy less fine details, and therefore it is especially recommended for use in the manufacture of 2D molds. (for example, a medallion).

Which liquid silicone rubber to choose?

There are two varieties of liquid silicone rubber. Liquid silicone rubbers for casting are divided by condensation (5% catalyst) and polyaddition (1:1 ratio).

Liquid Silicone Rubber with Condensation Liquid Mold 20 shore is the most widely used and best value for money silicone rubber for mould making. The silicone is white in colour and the 20 shore strength ensures the mould will last for up to 50 times without deformation. Thanks to the specific formulation, there is no need to worry about the product being dangerous. Once the rubber has solidified, it is completely safe in contact with the skin. Very suitable for working with epoxy, wax, low temperature metals, plaster, soap or cement.

Polyaddition liquid silicone rubber Pure Mold is a transparent or gently milky product. Due to its transparency, it is possible to see the entire project and, if necessary, move the liquid inside the form to avoid places that were not filled with liquid. Another advantage of the product is:

  • Very low viscousness (well liquid) for the utmost detail
  • Very stable and does not shrink even months after preparation
  • 14 shore strength, to make it easier to remove the mould from a highly detailed object to be copied

Very suitable for working with epoxy, wax, low-temperature metals, gypsum, soap or cement. You can also safely make a mold from larger statues.

Which two-component plastic silicone rubber to choose for molding?

ResinPro has developed the IGUM series to ensure all the needs of its customers.

IGUM is a two-component, non-toxic and very easy-to-use ductile silicone rubber. Since the product is plastic, its biggest advantage is the possibility of molding between the handswhich itself is one exciting flat mold. I Gum does not drip and is ideal for reproducing "2D" objects (e.g. coins, medallions or ornaments), you simply take an equal amount of both components, mix together and press on the object to be copied.

For example, if you want to reproduce a pattern or shape on a vertical surface, you can simply apply I gumi to it, and already after 4 minutes you will have a ready-to-use form!

There are two versions: the classic IGUM, which hardens in 30 minutes and provides a longer processing time, and the IGUM "FAST" version, which is ready for molding in just 4 minutes!

I gum

Non-toxic silicone rubber in the form of a moldable paste. The product can be manually transferred directly to the reproducible model. "IGUM" silicone rubber paste is soft and durable ideally suitable for accurate copying of ornaments and figurines. With i gumist mold, you can safely use epoxys, gypsum, wax, metals that melt at low temperature, soap and cement.

  • Easy to use, no scale or precision tools required;
  • Safe and odorless, no gloves and no mask required;
  • Workable and manually applied (non-toxic certificate);
  • Shape your models quickly: harden in just 30 minutes;
  • Durable: allows you to copy more than 50 times with plaster, resin, light-melting metal or wax.

I gum fast

Ultra-fast-drying non-toxic silicone rubber in the form of a moldable paste. The product can be manually transferred directly to the reproducible model. I gum FAST silicone rubber paste is soft and durable ideally suitable for accurate copying of ornaments and figurines. With the gum FAST form, you can safely use epoxys, gypsum, wax, metals that melt at low temperature, soap and cement.

  • The fastest on the market : perfect molds, ready in just 4 minutes;
  • Easy to use, no scale or precision tools required;
  • Safe and odorless, no gloves and no mask required;
  • Workable and manually applied (non-toxic certificate);
  • Shape your models quickly: harden in just 30 minutes;
  • Durable: allows you to copy more than 50 times with plaster, resin, light-melting metal or wax.