3D-FINISH "Quick" coating for 3D printed products
The two-component epoxy system consists of 250 g resin (component A) and 120 g hardener (component B).
Developed specifically for the 3D sector, it does not drip or coat small parts, while precisely following all printing standards.
Mixing ratio 100:45;
For an area of 5 cm2 you only need 25 g
Drying speed
At temperatures from 20°C to 3 hours
At temperatures from 30°C to solid for 2 hours
3D-FINISH - post-print coating for 3D prints Take your 3D creation to new heights with 3D-FINISH the ultimate solution for polishing, strengthening and enhancing your 3D printed models. Key features:
- Smooth and shiny surfaces : 3D-FINISH makes the surfaces of your prints incredibly glossy, smooth and without visible layers, eliminating irregularities between layers.
- Better mechanical resistance : this coating not only improves the aesthetics but also strengthens the structure of your prints, making them more resistant to impact.
- Easy application and fast curing : at 20°C the coating sets in 3 hours, at 30°C in 2 hours. The curing speed can be accelerated by using a heat source.
- Compatible with multiple materials : perfect for PLA, LAYWOOD and ABS, 3D-FINISH offers a flawless and durable finish.
- Adaptable : can be coloured with stains or metallic powders to match the desired design.
- Unscented and easy to sand , ideal for creating evenly coloured surfaces.
Applications and use:
- Diversity : In addition to improving the appearance of prints, 3D-FINISH can be used as an adhesive to bond prints or repair damaged 3D artifacts.
- Easy to use : With a mixing ratio of 100:45, only 25 grams are needed to cover a surface of 200 cm². The application time varies from 10 to 20 minutes depending on the temperature.