Filters
Done
  • Transparent epoxy resin
    15.00 489.00 

    Water-Clear – Two-component epoxy system (composed of resin and hardener) highly efficient for film application (1 mm) and castings up to 20 mm thickness.

  • 39.90 287.90 

    Epoxytable-5 allows high-thickness castings, non-yellowing and scratch-resistant. Specifically developed to provide the perfect product for the creation of wooden and resin tables! Ultra-low exothermic reaction allows high-thickness castings without overheating and without deformations. Perfectly transparent and non-yellowing.

  • 40.00 770.00 

    Special solution for casting up to 10 cm. It allows casting in high thicknesses, is non-yellowing and scratch-resistant.
    Ideal product for the creation of wooden and resin tables! The very low exotherm allows to cast large thicknesses without overheating and without deformations. Perfectly transparent and non yellowing.

  • 19.00 55.00 

    High-performance clear resin is a two-part product designed for top coat and DIY.

    The original “TOP PRO” formula provides a long-lasting smooth, glossy, anti-scratch and heat-resistant finish of the highest quality. Ideal for both DIY/home users and industrial users, the floor paint can be easily applied and the surface will be usable again within 24 hours. ransparent self-levelling UV-resistant epoxy system, which creates a hard and glossy protective layer for castings up to 5 mm.

  • 20.90 
    mix-ratio100A: 45B (Mix ratio based on weight)

    Post-print coating for polishing and finishing 3D prints. Applied on any kind print, it makes the treated surface glossy, smooth and impact-resistant.
    Specifically developed to be used in 3D applications, it does not drip or cover small details, faithfully respecting all the shapes of the printing.

    Eliminates unevenness between the different layers;
    Glossy;
    Strengthens the mechanical resistance of the printing;
    Can be polished and painted.

    Cure time

    4 hours at 20°C [68 F]
    2 hours at 30°C [86 F]
    If you want to paint your printing according to your tastes, 3D Finish “Fast” can be coloured with colouring pastes and metal powders.

    Excellent adhesion and reinforcement on PLA, LAYWOOD, ABS. Fast and effective, it is an easy-to-apply solution to create finished items through 3D printing more quickly, improving their aesthetic uniformity and their impact strength. Thanks to its high mechanical resistance, it is also perfect to be used as a bonding agent between printings or to repair damaged 3D artefacts. We recommend to store the product in a dark, cool and dry place away from direct sunlight. The tools must be washed with IPA (isopropyl alcohol).

  • 38.00 150.00 

    Transparent self-levelling UV-resistant epoxy system, which creates a hard and glossy protective layer for casting up to 1 cm.
    ART PRO, the epoxy resin for the artistic sector: thanks to its special formula and its dense structure, it allows you to create paintings with the “pour paint” and liquid paint technique. It does not leak out from the working surface, slowly reaching the corners of the frame.
    ART PRO preserves your original design and prevents any possible modification due to the casting of the resin: because of its special formula, the layers of colours do not expand and do not mix (unless you deliberately intervene), faithfully keeping with your creative idea!
    The surface is perfectly smooth and moisture-resistant. Solvent-free and odourless epoxy resin.

  • 39.00 

    Art Pro Deluxe non-toxic transparent resin for fluid art and vertical applications (for professional use)
    Transparent self-levelling UV-resistant epoxy system, which creates a hard and glossy protective layer for casting up to 1 cm (ex. coasters, trays, art objects).
    The surface is perfectly smooth and moisture-resistant. Solvent-free and odourless epoxy resin.

  • 29.00 

    Our legendary Sahara pigments are now in the Chameleon version!
    Sahara Chameleon Pigment Set will allow you to give even more emphasis to your creations.
    Being the metallic pigments, you can create fantastic 3D effects!
    Sahara Chameleon Pigment Set includes 5 chamelion colors of 10 gr.

  • 5.00 

    Intense and brilliant color, ideal for Transparent and Polyurethane Epoxy Resins. The “Colorfun Deluxe” range has a high coverage allowing to obtain a full and bright color. The high concentration guarantees an opaque color with a few drops.
    Can be used to color the various products in the RESIN PRO range.

    Clear
  • 5.00 

    BRILLIANT COLORS FOR EPOXY AND POLYURETHANE RESINS (GLASS EFFECT).

    It can be used to color the various products in the RESIN PRO range.
    Add the color to component A until you get the shade you want.
    It is possible to mix several together to achieve the desired color effect.

    For example, by mixing RED and WHITE, a Pink color is obtained.

    Clear
  • 5.00 

    Magic crystal paint: new transparent colors for resins Are you literally fascinated by crystals? Why don’t you create them yourself? Using the colors of magic crystals and Transparente transparent ResinPro resin, you can create personalized crystals quickly and easily! The colors remain completely transparent. Choose the perfect color for your idea!

    Clear
  • -17% Off

    A very good set for those who want to make figurines, cabinet buttons, crystals, buttons, etc.

    The set includes:

    • Liquidissima clear epoxy resin
    • Colorfun deluxe (to give a uniform color to a transparent epo)
    • Sahara Mica set (powder pigment for creating an effective color pattern)
    • Bebeo stained glass color (for a transparent but tinted effect)
    • Pure mold (Liquid silicone with very detailed copying properties that can be used repeatedly)

    All the pigments in the kit can be mixed together. The pigment must not exceed 2% by weight of component A.

  • 27.00 102.00 

    TRANSPARENT Epoxy Resin certified for food contact! To coat your dishes and cutting boards!

    Non-toxic and certified for food contact (also liquids). Two-component, high-modulus, unfilled, medium-fluidized epoxy system. The system is composed using only raw materials included in the positive list of substances allowed for food contact (EU Regulation No. 10/2011 January 14, 2011)

    Excellent surface finish and good resistance to yellowing, to be used with the casting method, characterized by high transparency, good external stability, excellent mechanical resistance and resistance to basic and acid substances.

  • 27.00 102.00 

    “EPOXYWOOD” Epoxy Resin for Wood – Protective coating, Restoration, Reinforcement.
    Protects, strengthens and polishes the wood, deeply penetrating thanks to its low viscosity.
    Solvent-free, it can be applied to any type of wood, including fibreglass and metal.

    Great for wooden, fibreglass and metal surfaces. In addition to surface protection, it enhances the wood grain and provides a pleasant aesthetic effect.

  • 9.30 

    FLUORESCENT UV PIGMENT (Fluorescent powder) – Luminescent that glows in the dark.
    A pigment in fluorescent powder that lights up in the dark, having a high concentration of active ingredients, it is strongly phosphorescent!
    Great for highlighting details that you want to make visible in the dark, escape routes or exits, simply adding it to resins, paints or varnishes, it is ideal for decoupage, decoration and everything related to DIY or creativity.

    Clear
  • 25.00 

    All the nuances for super beautiful creations!
    Brand new glitter from the Galaxy line will allow you to give even more emphasis to your creations.

    Being flake pigments, you can create fantastic 3D effects!

    StarLite Galaxy Set includes 10 10g colors, Our new Galaxy line glitter is perfect for decorating your creations with resin!

  • 7.00 

    Glitter is made from metallised polyester film with 98% pure aluminium.
    The selection of the finest raw materials and the high production technology allows us to offer a product with brilliant shades and high-dimensional constancy.

    Due to its wide range of colours, it can be used in several decorative applications, such as: hobbies, home decoration, fine arts, nail art.

    Add to the glitter a small amount of binder (oil, resin, etc.) and carefully mix. If necessary, add more binder or glitter until you obtain a glossy paste.

    Clear
  • Out of Stock
    19.20 

    GlobalWax release agent (liquid) creates a wax film on the mould surfaces and on the models, with strong anti-adhesion characteristics and high temperature resistance up to + 180°C

    It is particularly recommended for the preparation of moulds and formworks for the pouring of resins.
    You can apply it on wood, metal, plastic or even cardboard, and in a few minutes you will have a perfectly anti-adherent surface to pour the resin or other compounds.

    Application – Brush or spray gun.
    Colour: – white.
    Package: 1000 ml
    Very effective release agent that can be applied by brush or spray gun. It dries quickly in 2-3 minutes and retains all the details of the mould.

  • 21.00 

    GlobalWax release agent (liquid) creates a wax film on the mould surfaces and on the models, with strong anti-adhesion characteristics and high temperature resistance up to + 180°C

    It is particularly recommended for the preparation of moulds and formworks for the pouring of resins.
    You can apply it on wood, metal, plastic or even cardboard, and in a few minutes you will have a perfectly anti-adherent surface to pour the resin or other compounds.

    Application – Brush or spray gun.
    Colour: – white.
    Package: 1000 ml
    Very effective release agent that can be applied by brush or spray gun. It dries quickly in 2-3 minutes and retains all the details of the mould.

  • 18.00 

    Completely non-toxic silicone rubber in paste to be directly applied onto the model you want to replicate. Prior to using, it should be mixed with its catalyst paste (in equal parts, 1: 1) until you have a homogeneous mixture. Due to its non-stick performance on all surfaces, you don’t need to wash the tools after use and it is not necessary to apply other release agents to the model.

  • 17.50 37.90 

    Highly reactive reduced-yellowing transparent epoxy resin for silicone moulds. Professional product specifically designed for jewellery production and artistic creations. Developed to ensure the advantages of epoxy resin (transparency, hardness, shininess) but with shorter curing times compared to traditional resins.

    Thanks to its special formulation, you can remove your models after 6h00’. The catalysis times are also sensitive to external factors, such as temperature. The higher the temperature, the faster the catalysis. Furthermore, the product can be removed from the silicone moulds after 8 hours, but reaches its maximum hardness (not deformable) after 24-48h.

  • 19.90 28.90 

    Highly fluid WHITE polyurethane casting resin with high hardening properties, for all kinds of handcrafted creations and fast prototyping in the modelling branch.
    Thanks to its high-speed catalysis (30 minutes), you can quickly reproduce objects of all sizes in a perfect way.
    In the liquid state, the resin can be easily coloured with any compatible colouring paste. Furthermore, once hardened it can be coloured with acrylic colours.

  • 13.70 

    Liquid bronze is a particular paint based on resins and metallic pigments that lends itself to being an ideal product for the restoration, retouching and creation of golden artistic effects on various surfaces that will acquire a particular metallic luster.

    To apply this paint, just put the desired amount on a brush with which you will slowly massage the work surface.

    The drying time: 24h

    Clear
  • 20.90 

    Casting liquid silicone rubber, able to penetrate everywhere and to reproduce any small detail.
    It is suitable for making moulds for small objects, even with very fine details and noticeable undercuts. Before use, it is necessary to add 5% of catalyst.

    Liquid Silicone Rubber for Making Highly Detailed Moulds

    Compatible with Resin, Soap and Polymer Pastes.
    Ideal for multiple reproductions of models and complex shapes and jewels of any kind.
    White Colour – Mixing Ratio: 100: 5 by weight (= 5%).

    Complete hardening 12h. Liquid medium-hard condensation pourable silicone rubber (20 shore A).

  • 21.00 37.50 

    TRANSPARENT EPOXY RESIN FOR CREATIONS – liquid RESIN for very elaborate moulds.

    LIQUIDISSIMA Epoxy resin is a two-component product based on epoxy resin and relative amine hardener.
    Thanks to its special formula and the extended catalysis times, Liquidissima resin is suggested for castings at least up to 1 cm [0,39”] thickness.

  • 6.00 

    High gloss metallic pigments with excellent covering power.
    The wide range of shades allows it to be used in fine arts, in decoration, in restoration and in many industrial uses.

    THREE colors are available: aluminum, rich gold, copper. Simply adding it to resins, paints or varnishes, it is ideal for decoupage, decoration and everything related to DIY.

    Clear
  • 20.90 

    PIGMENTS WITH COLORED BASE is ideal for decoupage, decoration and everything related to DIY.
    By simply adding it to resins, paints or varnishes, you could express your creativity with truly brilliant shades (neon effect!).

    ATTENTION: it does not light up in the dark, it is not phosphorescent.

  • -15% Off
    22.90 

    The ideal set for creating a sea wave effect: on saucers, geodes, ocean art style paintings and to create all kinds of artistic coatings. The “Ocean Art” set contains paints, pigments and an additive that reacts with liquid epoxy resins. The epoxy resin mixed with the additive creates wavy and bumpy effects in the epo mixed with the pigment.

    The set is:

    • Safe and user friendly
    • Odorless
    • Non-toxic and non-flammable
    • Zero-VOC formula without harsh chemical ingredients, solvents or alcohol-based ink
      Ideal for ocean resin art

    The “Ocean Art” set includes:

    • 25 ml “Colorfun Deluxe” white paint paste
    • 25 ml “Colorfun Deluxe” blue paint paste
    • 25 ml “Colorfun Deluxe” True Green
    • “Pebeo” turquoise transparent liquid pigment
    • 15 ml Liquid additive “Magic Drops Small”
  • 20.00 

    Resin for lamination with carbon fiber / glass fiber (500 gr of component A + 275 gr of component B).
    Product formulated to guarantee maximum mechanical resistance and good impregnation of the
    fibers of the technical fabric.
    Epoxy formulation for applications at room temperature of technical fabrics. It guarantees maximum
    mechanical resistance and, thanks to the high resistance to ambient humidity, a glossy surface.

    Technical data: Mixing ratio 100: 55 (by weight); Viscosity: Medium (300-400 cps at 25 ° C);
    Yellowing: medium-high (Gardner 2); Mechanical features: very high; Gel time (1mm 30C film):
    1h00′-1h30′; Pot life (100g at 25C °): 20′

  • 20.00 

    Resin for lamination with carbon fiber / glass fiber (500 gr of component A + 275 gr of component B).
    Product formulated to guarantee maximum mechanical resistance and good impregnation of the
    fibers of the technical fabric.
    Epoxy formulation for applications at room temperature of technical fabrics. It guarantees maximum
    mechanical resistance and, thanks to the high resistance to ambient humidity, a glossy surface.

    Technical data: Mixing ratio 100: 55 (by weight); Viscosity: Medium (300-400 cps at 25 ° C);
    Yellowing: medium-high (Gardner 2); Mechanical features: very high; Gel time (1mm 30C film):
    1h00′-1h30′; Pot life (100g at 25C °): 20′

  • 10.00 

    The photoluminescent additive that lights up in the dark, having a high concentration of the active ingredients, is strongly phosphorescent!
    WHITE PIGMENTS that light up in the dark with different fluorescent shades.
    Great for highlighting details that you want to make visible in the dark, escape routes or exits, simply adding it to resins, paints or varnishes, it is ideal for decoupage, decoration and everything related to DIY.

    Clear
  • 18.00 

    Highly fluid polyurethane casting formulation with high shore A hardness, for fast prototyping in the modelling and automation branch.
    Prototypes made with silicone moulds and polyurethane resin can be used for pre-processing, strength and dimensionality tests to make improvements to the workpiece prior to serial production of the finished product.
    Thanks to our polyurethane formulation, you can get uniform, glossy and resistant models or artistic creations in just 2 minutes.
    It can be coloured with the “Colour Fun” series colours.